The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

Multi-objective Optimization of Differential Steering System of Electric Vehicle with Motorized Wheels

A differential steering system is presented for electric vehicle with motorized wheels and a dynamic model of three-freedom car is built. Based on these models, the quantitative expressions of the road feel, sensitivity, and operation stability of the steering are derived. Then, according to the features of multi-constrained optimization of multi-objective function, a multi-island genetic algorithm （MIGA） is designed. Taking the road feel and the sensi- tivity of the steering as optimization objectives and the operation stability of the steering as a constraint, the system parameters are optimized. The simulation results show that the system optimized with MIGA can improve the steering road feel, and guarantee the operation stability and steering sensibility.     

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

盒形件超塑成形过程中材料流动规律的数值模拟与实验

利用有限元软件MSC.Marc2010对钛合金盒形件超塑成形过程进行了有限元模拟,控制目标应变速率,得到优化的压力-时间曲线,并据此进行实验研究,沿实验曲线分别加载至6个不同的标定压力值(分别为0.5,1.0,1.5,2.0,2.3和2.5MPa)得到成形过程中的零件。测量6个实验零件的外形轮廓和厚度,并分别与相对应的模拟结果进行对比,验证实验与模拟的一致性,并分析整个成形过程中的材料流动规律,得出在自由胀形、底部贴模、充填圆角3阶段盒形件不同区域的应力、应变和变薄率分布,为复杂零件的超塑成形工艺的制定奠定了一定的理论基础。     

九黄机场8月和10月风特征分析

利用九黄机场20号跑道自动观测站2004-2010年8月和10月的2分钟平均风向和风速资料,对九黄机场8月和-10月风向、风速的半小时平均状况进行了统计分析。分析表明：九黄机场8月和10月风向分布总体差别不大,8月主导风向为ESE和SSW,10月主导风向为NNE和S;N和NNE风向日出现时间变化很大;风速日变化特征明显,夜间风速较小,白天风速较大;上午8：00左右风速开始逐渐增大,8月平均最大风速时间段为17：00．18：00,10月平均最大风速时间段为18：00．19：00,8月日半小时平均最大风速为5m·s^-1,10月日半小时平均最大风速为3．5m·s^-1;8月风速大于12m·s^-1几率较小,10月风速大于10m·s^-1几率较小,可为8月和10月九黄机场飞机起降提供有益参考。     

空乘大学生心理健康现状调查与对策分析

心理健康对于学生的成长成才具有至关重要的作用。文章针对飞行学院2009级和2010级空乘专业学生进行了心理健康现状调查,分析了目前学院学生的心理健康整体水平和成长需求,为学院在制订学生心理健康培养对策时提供理论参考。     

新时期高师院校师德建设动力系统研究

新时期高师院校师德建设动力主要包括由上而下的拉动力、教师加强自我修养的自动力和教师所处学校环境、社会环境的推动力,以及由于师范院校教师教育特殊性引起非高师院校和社会对其师德状况的较高预期而形成的促动力等。这些动力在高师院校内会通过动力开发、动力转化、动力反馈等环节运行并从不同层面给予师德建设以推动。新时期高师院校构建师德建设动力系统的过程,实际上就是将师德准入、师德评价、师德考核、教师职业荣誉感培育等制度设计整合进动力系统之中,并使其相互融合及良性互动的过程。     

航天器推力器布设对燃料消耗的影响

对航天器六自由度控制的推力分配问题进行了研究,参考卫星导航系统中几何精度衰减因子(GDOP) 的定义,首次提出了推力器构型燃料消耗因子（FCF）的概念,并将此概念用于定义推力器相对几何关系引起的期望控制量与燃料消耗间的比例关系。通过矩阵理论分析得到了燃料消耗因子随推力器数目增加而减少的结论,并通过仿真计算对结论进行了验证。     

角速率输入条件下圆锥误差补偿算法

针对捷联惯导系统中利用角速率拟合角增量进行圆锥误差补偿精度下降和实时性变差的问题,提出了一种直接利用陀螺的角速率输出进行圆锥误差补偿的算法,利用角速率的叉乘项来拟合圆锥误差补偿项,并推导了四子样圆锥误差补偿算法的具体表达形式,并从本质上阐述了圆锥误差的存在机理。在典型圆锥运动条件下通过对所提算法的仿真并和理论解析解的做差比较,验证了所提算法的可行性和有效性。     

捻度对缝合线浸润特性的影响

研究不同捻度缝合线的浸润效果,通过SEM(扫描电子显微镜)观察不同捻度缝合线浸润树脂后的尺寸及其与树脂界面结合情况.研究结果表明:随着缝合线捻度的增加,树脂浸润缝合线的效果变差,缝合线纤维束及单丝与树脂结合情况变差;浸润树脂后的缝合线纤维束尺寸相对浸润之前提高,但随着捻度的增加,浸润树脂后的缝合线纤维束尺寸降低.